HEAT HERO DIRECT INSTALLATION GUIDE

🛡️Warranty

Heat Hero products are covered by a 5-year warranty; all other supplied components are covered by a 1-year warranty.

1. Direct Unit	Can be rotated in any direction and installed at any point on the gravity pipes.
2. Circulation Pump	Use an 8-metre pump for more efficiency, hotter radiators and hotter water.
3. Pipe Thermostat	Set to 55°C and fit close to the solid-fuel boiler.
4. Temperature Probe	Fit to the stove or gravity flow within 1 metre, without restricting water flow.
5. Thermal Safety Valve	Opens at 99°C, circulating water through the 44 kW cooling loop to safely cool the boiler.
6. Expansion Pipe	Minimum ¾”, installed at the highest point of the gravity flow.
7. Heating Storage Tank	Minimum 1 meter above the highest point of the heating system.
8. Cold Feed	Must be connected anywhere on the gravity return.
9. Heating Zones	At least one radiator zone must be open when the solid-fuel circulation pump is running.
10. Non-Return Valve	Use a flap-type gravity non-return valve, not a spring-type valve.
11. Wiring Centre	Can be used for multiple zone control.